How To Access Router Settings Without Internet Connection

Chapter Disclosure: As an Amazon Associate I earn from qualifying purchases.

Although it's non very common, in that location accept been times where I have lost my Net connectedness. This got me thinking every bit to whether the router would continue to work without the Net and whether all of my devices would still be able to communicate with each other.

A router will piece of work without the Cyberspace and provide a local area network that connected devices tin communicate with each other on. This allows shared services like file sharing and shared printers to nonetheless be used even without an Net connection.

Let'due south accept a look at how you tin access content via your router and how to set upwards your own home network, even when you don't have access to the Internet. You'll be glad to hear that information technology is actually very easy!

Will a Router Piece of work Without the Net?

A router will work without an Net connection and provide you with both a wired and wireless network; information technology's just that the devices connected to the network won't be able to access the Internet.

Beingness on the same network, all of the connected devices will be able to communicate with each other, so you don't have to worry about losing services like file sharing and shared printers when you are unfortunate enough to lose your Cyberspace.

Can You Access Content From a Router Without Net?

Y'all can access content from a device that is connected to your router without an Internet connection, simply the content you can stream will depend on the model of router you have.

Even without an Cyberspace connexion, all of the connected devices on a network will be able to communicate with each other, and this includes any storage devices that are connected to the router itself.

When a device joins the network, it will be assigned an IP address which marks their place on the internal network. Providing a networked storage device, like a NAS (Network Attached Storage), receives an IP address, it should exist accessible to access the content stored on it.

A storage device like a USB difficult bulldoze that is connected to the router directly using USB won't receive its own IP address merely can still be accessed via the router itself.

If you do accept a storage device connected to your router, you may find you demand to login to the router and gear up it to share the device, but if it has a USB port already you volition likely detect this is enabled past default.

When it comes to accessing content, the simply divergence when you don't take an Cyberspace connection is non beingness able to access annihilation that sits outside of your internal network.

How to Access Router Settings Without Internet

It is possible to admission your router's settings without an Internet connection, but you will need a straight connection with the router.

Although you lot can ready the connection with the router wirelessly, it is easier and more reliable to use an Ethernet cable in instance you need to alter any of the wireless settings.

Changing the wireless settings whilst connected wirelessly tin effect in yous losing your connexion and non beingness able to re-connect, so you lot are better off but connecting using Ethernet in the first place.

1. Connect i end of an Ethernet cable

Plug i end of an Ethernet cablevision into one of the numbered LAN (Local Area Network) ports found on the back of the router. It doesn't matter which you choose; just make sure y'all don't plug information technology into the single WAN (Wide Expanse Network) port.

2. Connect the other end of the Ethernet cable

Plug the other end of the Ethernet cablevision into the Ethernet port on your device, exist it a laptop or PC.

3. Find the router's IP address

Common IP addresses for a router include "192.168.0.1", "192.168.ane.1", "192.168.1.254" or "192.168.0.254" but yours may be unlike depending on the manufacturer.

If you tin't find the IP address, follow these steps:

Click on the Start button
Blazon "cmd" and printing Enter
Blazon "ipconfig" and press Enter

The Default Gateway is the IP address of your router. Make a notation of it equally we will need information technology in the adjacent pace.

4. Enter the IP address into the web browser

Open your spider web browser and enter the IP accost of the router into the web address field at the peak of the window. You should and then be presented with a login screen.

v. Login to the router

Enter the username and password for the router. If y'all aren't sure of what they are, check the dorsum of the router as most manufacturers will place a card with both printed on at that place, or cheque the documentation that came with the router.

Once y'all accept entered the username and password, click on the Login button to be taken to your router's settings.

How to Setup a Abode Network Without Internet

Setting up a dwelling house network for both wired and wireless devices even when you don't have the Internet is a very straight forward process.

Here is what you will need to do.

1. Connect the wired devices to the router

Permit's tackle the wired devices showtime.

Take i end of an Ethernet cable and plug it into i of the available LAN ports plant on the back of the router. Plug the other finish into the Ethernet port on the device itself.

2. Login to the router

Following the same steps covered above, log in to your router and await for network settings. You should easily find a screen that gives yous admission to DHCP (Dynamic Host Configuration Protocol) settings.

3. Set the DHCP range

Side by side is to prepare the range of the IP addresses that your router will dish out to the devices that connect information technology. The router itself will have its own IP address, so this needs to be excluded from the range. You'll already know the IP address equally you lot would accept needed to enter it in your web browser in order to login to the router.

Configure the DHCP range to start one address to a higher place the router itself, and then if your router is using 192.168.0.i, have the range showtime at 192.168.0.ii. Set the end of the range to be 192.168.1.254.

You may notice an option for DNS (Domain Name Organisation) here, as well. Since in that location is no Internet, you don't take to worry about it and tin can leave it equally the default settings.

4. Test a wired device

Now that the DHCP range has been fix and your device is connected direct to your router, y'all can test the connection.

Click on the Starting time button
Blazon "cmd" and printing Enter
Blazon "ipconfig" and press Enter

You should find that the IP address shown, which is what the router has assigned to that detail device, falls inside the DHCP range that you only prepare.

five. Set the wireless SSID

The wireless characteristic on the router is likely already enabled, just it doesn't injure to log back into the router and check as in that location are a couple of other settings you will want to bank check at the same time.

Head to the wireless menu and make certain it is enabled. On the same card, you will run into options to modify the wireless SSID (Service Set Identifier), password, and security protocol.

It is good practice to change both the SSID and password to something strong and unique to help improve the overall security of your home network, and so I would recommend you lot do this now.

Also make sure that the appropriate security protocol is enabled. Use WPA2 wherever possible.

Save your changes and log out of the router.

six. Test a wireless device

Take a device that has a wireless card built-in, like a laptop or your phone, and wait for available wireless connections.

You should run across your SSID as available; it is every bit simple as connecting to it using the username and password mentioned in the previous pace.

Repeat the "ipconfig" command on this device to make certain the IP address it receives also falls within the DHCP puddle.

The final test is to check the connectivity between the two devices connected to the network. Allow's assume that the wired device has the IP accost 192.168.0.2

Click on the Start push button
Type "cmd" and press Enter
Type "ping 192.168.0.two" and press Enter

If you lot get a response, this confirms that both devices are continued to the same network and can communicate with each other, fifty-fifty without the Cyberspace.

Final Thoughts

A router will work without the Cyberspace in the sense that it can establish both wired and wireless networks that all of your devices can connect to and communicate with each other on.

They will be able to access anything that is contained inside the network itself, like a USB hard bulldoze continued to the back of the router simply will be out of luck when information technology comes to accessing anything over the Internet.

I hope you found this article assistance. If you did, here are some others you may bask:

Recommended Routers
Can a Network Switch Exist Used as a Router?
How to Employ the Ping Command
What Is the USB Port on a Router For?
Practise You Demand a Router If You lot Have a Modem?
Best Place for a Router: 8 Tips
How to Setup 2 Routers on the Aforementioned Network

Source: https://homenetworkgeek.com/can-a-router-work-without-the-internet/